407-P

7,000-lb. Capacity/ Four Post Parking Lift

AMGO 407-P is a truly space-saving solution. It takes up much less space than counterparts,features a patented concealed safety device, and allows back-to-back installation. Ideal for shops or home garages, this commercial-grade lift is easy to install and demands little maintenance.

Contact Us Now

Click to download Product Brochure

Click to download Product Manual

 

Features

● Lifting capacity: 7,000lbs.
● AMGO ETL certified power unit comes as standard.
● High quality cylinder is designed and made to a high standard.
● AMGO’s patented design concealed safety lock control device, with manual single-point lock release.
● Aero standard cables are included as standard.
● Double-   shaped columns are utilized to enhance strength.
● Non-slip platforms come with foldable drive-in ramps as standard.
● Support back to back installation to minimize space occupancy.
● Power side column can be installed at any corner.

Specifications

407-P Specifications
Model407-P
Lifting Capacity7,000 Ibs
Lifting Time83s(110v)
31s(220v)
Overall Length (Inc Ramps)A185 13/16"
Outside Edge of CrossbeamsB145 11/16"
Overall WidthC94 13/16"
Width Between PostsD85 5/16"
Max. Lifting HeightE73 7/16"
Max. Locking Height72 11/16"
Overall HeightF82 7/8"
Minimum HeightG4 15/16"
Max. Underneath HeightH69 1/2"
Max. Lock Underneath Runway66 3/4"
Drive-Thru ClearanceI77"
Width Between RunwaysJ37"
Outside Edge of RunwaysK74 7/16"
Gross Weight1,430 lbs
Motor2.0HP(220v)
1.0HP(110V)

Detailed Image

AMGO'spatented design concealed safety lock control device, with manual single point lock release.

Foldable drive-on ramps. (each lift 2 units).

Double safety locks provide additional safety.

90° motor installing plate.

Optional Caster kits help easily maneuver the parking lift. One set 4pcs. Kits No: 40801

Optional plastic oil tray (1 set, 4pcs) Kits No.: 40806.

Optional extended aluminum drive-in ramp. Kits No.: 40814, each lift needs 2 units.

Optional Jack Tray Kit No.: 40816

Optional Motor Protective cover (with emergency stop switch). Kits No.: 40810

Optional rubber wheel chock P/N: 40811

Optional storage wave panels Kits No.: 40812.

Optional J5H sliding jack with hand pump, 2.5" extension adapters included. Capacity 5,000lbs.

Shipping Information

1 units/package, packing measurement (LxWxH): 146" x 20 1/4"x 29 5/16". Packed with Power Unit.

3 units/package, packing measurement (LxWxH) : 146" x 20 1/4"x 86 1/4"

After the machine is pulled out from the container, use the forklift to lift the machine from the middle position.

Reviews

There are no reviews yet.

Be the first to review “407-P”

Your email address will not be published. Required fields are marked *